Finalit Stone & Ceramic Care Products
FINALIT NO. 7 GRAFFITI AND PAINT REMOVER (acidic)
- Intensive remover for graffiti, also for porous surfaces,
- epoxy resin, paint residues, paint, nail varnish,
- general adhesive residues, silicone, tar, ink, chewing gum,
- wall paper including adhesives, marker, felt-tipped pens, pencils;
- do not use on asphalt, it will turn yellow
- Also available in fluid form
- For all natural and artificial stones
Use undiluted 1 kg is sufficient for 10 m².
Product Information
Hazard statements
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.
DANGER
Application
Remove any coatings before using Finalit No. 5 Coating Remover!
- Use undiluted
- 1 kg is sufficient for 10 m²
- Clean using Finalit No.1 Intensive Cleaner (only with graffiti and paints)
- Exposure time is approx. 60 minutes
- Then thoroughly rinse with water
- Where possible, heat the surfaces to be treated
- Apply a generous thick layer of Finalit No.7+ using a sponge, brush or scraper
- Exposure time is approx. 5 – 60 minutes, then rub off or remove the coating using a sponge. Use a steam cleaner for porous material
- Then thoroughly rinse with water
- Clean surfaces as well as tools with Finalit No.1 Intensive Cleaner
- In special cases, it may be necessary to allow for a longer exposure time or to clean a second time.
- You need to make your own tests!
Finalit No.7+ may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.
Profi Tips
- Epoxy resin (No. 7+ is 3 times as intensive when used together with No. 8, 30%, )
- Chewing gum (if possible heat with a flame, apply using a machine and quartz sand or silicone, silicone grinding brush and single-disc machine)
- Excellent cleaner for extremely soiled stone surfaces
- Special chewing gum remover
- Removes epoxy resin residues
