Finalit Stone & Ceramic Care Products
FINALIT NO. 21 FIXATIVE PENETRATING STOPPER
- Pre-treatment of ABSORBANT MATERIALS, such as granite, marble, tiles, porphyry, and many more before applying Finalit impregnations.
- Colour enhancer.
- Pre-treatment when floor heating is installed.
- Pre-treatment before laying and jointing. Jointing aid. Hardener. Bonding agent.
- The temperature of the object must be above +10°C.
- Suitable for all natural and artificial stones!
Use undiluted. 1 litre is sufficient for 100 m².
Product Information
Hazard statements
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking.
DANGER
Application
Colour enhancer, wet effect! Intensified by applying twice. Colour intensification is not possible on polished materials, the final colour is already reached!
Important! With underfloor heating, always apply before the impregnation in order to avoid a sagging of the impregnation.
Only apply in conjunction with subsequent impregnation and never alone, soiling!
To achieve stronger slip resistance do not rinse subsequently. Apply generously using cotton strips to achieve a homogeneous flow, also good to polish
- Use undiluted
- 1 l is sufficient for 100 m²
- The temperature of the object must be above +10°C. The surface to be processed must be clean and dry.
- 1. Absorbent (matt) materials:
- Apply Finalit No. 21 Fixative Penetrating Stopper on the clean and dry surface using cotton strips or a roller or spray it on
- The exposure time is up to 1 hour
- Then impregnate (recommended)
- 2. Polished (glossy) materials:
- Apply Finalit No. 21 Fixative Penetrating Stopper on the clean and dry surface using cotton strips or a roller or spray it on. Wipe away excess agent immediately.
- The exposure time is up to 1 hour, then polish using white synthetic pads and a high-speed machine
- If streaks form (you have applied too much), then apply Finalit No. 21 Fixative Penetrating Stopper again and wipe it away immediately with a cloth
- Then impregnate (recommended). Wipe away the surplus of the impregnation immediately after applying and after it is dry, polish using white synthetic pads and a high-speed machine
- You need to make your own tests.
For all natural and artificial stones!
Profi Tips
Surpluses when pretreating and impregnating
- Surpluses or footprints can be removed using products containing solvents of the same product
- Apply the product again and rub off immediately applying pressure
- Applies for: No.21, No.20, No.22, No.24, No.25, No.30
- Remove surpluses or footprints of aqueus products with No. 5 Coating Remover
